PWS Series
Stainless steel pressure washer couplers
AKJia’s PWS Series stainless steel, pressure washer couplers are able to accommodate high flow rates and minimal pressure drops. The couplers are valveless, hence when disconnected any fluid in the system can escape. This
makes these couplers suitable for the transmission of nonhazardous fluids only.
Construction
- AISI 316 stainless steel
- Fitted with Viton seals
- Also available in Brass (See PWB Series)
FEATURES
- Valveless design allows for high flow rates and minimal pressure drop characteristics
- Female half has double ‘O’ ring sealing arrangement
- Bidirectional flow
APPLICATIONS
- Designed for use in pressure washer systems and systems containing non-hazardous fluids
Dimensions
Available Seals and Temperature Range
All carbon steel products have Nitrile Butadiene Rubber (NBR) seals fitted as standard. All stainless steel products have Fluoro-elastomer Rubber (Viton®) (FKM) seals fitted as standard. Special seal materials are available on request.
Abbreviation | Trade Name | Chemical Name | Min. Temp | Max. Temp |
---|---|---|---|---|
NBR, XNBR | Chemigum®, Hycar8, Breon®, Butakon®, Butacril®, Buna-N®, Perbunan®, Paracril®, Krynac®, Europrene-N®, Nipol® | Nitrile Butadiene Rubber Carboxylated Nitrile Rubber |
-40ºC (-40ºF) | 106ºC (223ºF) |
FKM(FPM) | Dai-el®, Fluorel®, Tecnoflon®, Viton® | Fluoro-elastomer Rubber | -20ºC (-4ºF) | 200ºC (392ºF) |
EPR, EPDM | Buna-AP®, Dufral®, Epsyn®, Nordel®, Epcar8, Keltan®, Royalene®, Polysar-EPDM® | Ethylene Propylene Copolymer Ethylene Propylene Terpolymer |
-50ºC (-58ºF) | 120ºC (248ºF) |
FVMQ | Silastic 1S®, FSE® | Fluorosilicone Rubber | -65ºC (-85ºF) | 170ºC (338ºF) |
FFKM | Perlast®, Kalrez®, Chemraz®, Kaflon® | Perfluoroelastomer | -25ºC (-13ºF) | 300ºC (572ºF) |